feat(scanstation): Scanner-Hardware config docs

content/scanstation/config/_index.de.md

@@ -45,4 +45,4 @@ Wenn du fertig bist kannst du über den Button "Back to Scanner" wieder in den S
 
 Wenn du die Software vom Läufersystem abmelden oder den Token ändern willst klicke auf "Log out from this Client".
 
-{{% /steps %}}
+{{% /steps %}}

content/scanstation/config/scanner.de.md

@@ -0,0 +1,54 @@
+---
+title: Scannerkonfiguration
+weight: 31
+prev: /scanstation/config
+---
+
+{{< callout type="warning" >}}
+  Diese Konfiguration wurde nur mit GD4130-BK/WH USB Scannern getestet
+{{< /callout >}}
+
+{{< callout type="info" >}}
+    Download als PDF: [Scannerkonfiguration.pdf](/files/scannerconfig.pdf)
+{{< /callout >}}
+
+{{% steps %}}
+
+### Werkseinstellungen wiederherstellen
+
+![Factory reset](/images/barcode_config/00_factory_reset.png)
+
+### 2. Programming Mode Aktivieren
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+### 3. Nur EAN-13 scannen (optional)
+
+![Check EAN Checkdigit](/images/barcode_config/02_disable_all.png)
+![Disable EAN Checkdigit](/images/barcode_config/03_enable_ean.png)
+
+### 4. EAN13 Check-Zahl überprüfen, aber nicht übertragen
+
+![Disable EAN Checkdigit](/images/barcode_config/05_disable_ean_digit.png)
+
+### 5. Scanner auf always on stellen (optional)
+
+![Scan mode: Always on](/images/barcode_config/06_always_on.png)
+
+### 6. Programming Mode Verlassen
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+### 7. Beep ausschalten (optional)
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+![Scan mode: Always on](/images/barcode_config/07_beep_off.png)
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+### 8. Tastatur auf Deutsch stellen (optional)
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+![Country Mode: Germany](/images/barcode_config/08_countrycode_germany.png)
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+{{% /steps %}}

content/scanstation/config/scanner.en.md

@@ -0,0 +1,54 @@
+---
+title: Scanner Configuration
+weight: 32
+prev: /scanstation/config
+---
+
+{{< callout type="warning" >}}
+  This configuration has only been tested with GD4130-BK/WH USB scanners
+{{< /callout >}}
+
+{{< callout type="info" >}}
+    Download as PDF: [Scanner Configuration.pdf](/files/scannerconfig.pdf)
+{{< /callout >}}
+
+{{% steps %}}
+
+### Restore Factory Settings
+
+![Factory reset](/images/barcode_config/00_factory_reset.png)
+
+### 2. Activate Programming Mode
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+### 3. Scan only EAN-13 (optional)
+
+![Check EAN Checkdigit](/images/barcode_config/02_disable_all.png)
+![Disable EAN Checkdigit](/images/barcode_config/03_enable_ean.png)
+
+### 4. Verify EAN13 Check Digit but Do Not Transmit
+
+![Disable EAN Checkdigit](/images/barcode_config/05_disable_ean_digit.png)
+
+### 5. Set Scanner to Always On (optional)
+
+![Scan mode: Always on](/images/barcode_config/06_always_on.png)
+
+### 6. Exit Programming Mode
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+### 7. Turn Off Beep (optional)
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+![Scan mode: Always on](/images/barcode_config/07_beep_off.png)
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+### 8. Set Keyboard to German (optional)
+
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+![Country Mode: Germany](/images/barcode_config/08_countrycode_germany.png)
+![Enter/Exit Programming Mode](/images/barcode_config/01_programming-mode.png)
+
+{{% /steps %}}